Art.No.ST202.64-D3

Pack Platine avec Flash Sea&Sea YS-D3 et Câble Fibre Optique

Platine universelle pour caisson photo sous-marine avec poignée à boule 25 mm, pince de serrage , bras plastic carbone long 18 cm et terminaison ys

Flash Sea and Sea YS-D3 et câble fibre optique

Dimensions:320 mm x 75 x 8 mm

Bouton filetage 1/4 pour caméra

Matériel: technopolymère

Composition

n.1 Sea and Sea Flash Ys-D3

n.1 Câble fibre optique M/2 connecteurs universels Art.no 50128

n.1 Platine avec 2 poignées à boule 25 mm 320 x 75 x 8 mm Art.no st202.04

n.2 Pince de serrage pour boules 25 mm Art.no 605.c1bk

n.1 Bras plastic carbon avec rotule 25mm long 18 cm Art.no pc018

n.1 Plastic carbon terminaison ys avec boule 25 mm Art.no yspc01

n.2 Bouton filetage 1/4 pour caméra Art.no pm14-13

n.2 bouton filetage m8

Sea and Sea Flash Ys-D3

[Guide Number (ISO 100/m) (land)] : 33, 28 (with Diffuser attached)

[Beam Angle] : 105°x80°  (without Diffuser), 110°x100°(with Diffuser)

[Batteries] : 4xAA A: 6V Ni-MH: 4.8V

[Number of Flashes *1] : A: 140 Ni-MH: 220

[Recycle time (full) *2] : A: 3.5 sec. Ni-MH: 1.7 sec.

[Color temperature] : 5800K

[Color temperature w/diffuser] : 5500K

[Depth rating] : 100m  / 330ft

[Dimensions (WxHxD)] : 92x111x147mm / 3.6 x 4.4 x 5.8 inches (excluding ball base) 

[Weight] : 610g / 21.5oz (w/o batteries) (excluding ball base)

[Underwater weight] :  Approx.-20g / -0.7oz (incl. batteries ball base)

[Others]

Exposure control: DS-TTL II,  Slave TTL, Light level control dial (GN): 1 / 1.4 / 2 / 2.8 /4 / 5.6 /8 / 11 / 16 / 22 / 33 (11 steps)

DS-TTL II function

Slave function

Auto power OFF function 30min

Sync cord: 5-pin Sync cord/N, Fiber-Optic Cable

Over-pressure relief valve

LED target light (output is adjustable in 2 steps)

Audible charge signal

*1 Number of flashes and recycle time depends on the battery brand, temperature and frequency of use.

*2 Number of flashes and recycle time of Ni-MH batteries were tested on 2500 mAh batteries.